***Important Installer Note***
- Read Before Ordering!!! -
Note: Before attempting to install any alarm, check if the vehicle has CAN-BUS.
Some CAN-BUS vehicles will require a special CAN-BUS alarm, some will not.
Unfortunately you cannot determine what vehicles require a CAN-BUS alarm
just by the fact that the vehicle has CAN-BUS. Most new vehicles today have
CAN-BUS but some still do not have the ability to have a CAN-BUS alarm installed.
The only way for you to know is to access the vehicle database on the Dynamco
website. If you do not have a login to the installers section of the Dynamco website
then use the below website link and complete the registration form.
http://www.dynamco.com.au/support_register.php
If you determine from the Dynamco vehicle database that a vehicle requires a CAN-BUS
alarm, contact us with the Make / Model / Year information and we can organise an alarm
to be preprogrammed to suit the vehicle. It will take 2 to 3 working days to have the alarm
programmed and air freighted over. The part number for a CAN-BUS alarm is 03-695CAN.
Note: See below linked 03-051 for information on installing the mini battery backup siren
Read the below blue text for guidance on how to turn off the mini battery backup siren:
To change the vehicles battery turn the ignition ON before disconnecting battery.
This will disable the internal battery. Turn the ignition to OFF after replacing vehicles battery
The 03-P375B-24V 5 star Cyclops remote controlled alarm/immobiliser comes with mini siren and glass break sensor
and may provide keyless entry. Although the siren is 12V, it gets if feed from the alarm which is 12-24V and therefore
it will also operate on 24V