Spark Shop Ultimate
Part number: 34-164
Pack size: EA
Group: Transmitter Remote 
Type: 8 Way 
Feature: 9V Battery, Interferance Free 
Amp: 10A At 12V/24V 

Part # 34-164

 

Note: This product was historically supplied with external antenna, however the new version
has an internal antenna. You may still be supplied the external antenna version until all stock
has run out.

Reliable, universal, low cost, light weight hand held 915MHz 8 way wireless
transmitter

Well suited for equipment and machinery control eg Crane Control, winches,
cement truck operation, lights etc
 
Note: Must be used with 8 way receiver and 9V battery which are not supplied and
are sold seperately - see below links for related products

Note: 1 or more transmitters can operate 1 or more receivers

Objects obstructing the line of site between the transmitter and receiver
willreduce operating reception distance. It is advised to use 01-102 antenna to
helpprevent anypotential performace issues. See below links for related
products.

This transmitter remote uses fast frequency hopping (FFH) to allow up to eight transmitters to
be used in the same area. No interference or jamming will occur. The FFH technology is
usually used in very expensive equipment with military and medical applications. This
transmitter is unique providing a low cost, light weight hand held 915MHz FFH transmitter.

This transmitter uses a dual digital coding called Multicode Technology (MCT). This MCT
digitalcoding can be either the 12-way dipswitch or the encrypted coding. The 12-way dip
switchallows for simple programming and involves the user to simply match the 12-way dip
switchon both the transmitter and receiver. The Transmitters 12-way dip switch is found
under the rear cover where the 9V battery is located. The encrypted coding is a random
generatedcode whichis programmed wirelessly to the transmitter and receiver. The
encrypted code isusually usewhen more codes are required for high security applications.
See attached PDFsetupinstructions which are linked at the end of this page for moredetails
on the dipswitchand encrypted coding.

The combination of FFH and MCT technology brings you a very sophisticated transmitter yet
easy to use. This transmitter also allows a mini external antenna to be connected via an SMA
connector which combined with an antenna located near the associated receiver will increase
the line of site transmitting range up to 350 metres.

Features include:

  • 8 channel operation (available with 1, 2, 3 4 way in same sized case, or 8, 12 and 16-
    channels is available with the largercase).
  • Fast Frequency Hopping operates on several frequencies for interference or jamming
    immunity.
  • Uses a standard 9-volt alkaline battery.
  • 12-way dipswitch (4096 codes) or Encrypted (Over 16 million codes).
  • User selectable modes.
  • More than 1 button can be press at a time, i.e. simultaneous channel transmission.
  • Flashing LED indicates a flat battery.
  • Can operate several transmitters next to each other with no interferences or jamming.
  • Available with standard Elsema labels or custom labels.
  • Standard version includes an internal pre-tuned antenna.
  • Able to trasmit up to 350 metres line of site when used with transmitter and receiver
    aerials.
  • User can enable return acknowledgment signal or maintain link feature.
  • Each transmission includes a CRC checksum for a high level of security and reliability,
    even in the nosiest electrical environments.
  • Built in Electro Static Protection (ESD).

Typical Applications

  • Industrial and commercial automation systems.
  • Industrial monitoring.
  • Security and Automotive Systems.
  • Remote Keyless Entry for high Security Sites.
  • Equipment and machinery control, eg Crane Control, winches, cement truck operation,
    lights etc
  • Advanced home automation, eg Alarms, gates, doors, garden lights, swimming pool control etc

Related Products