12V Alarm & Immobiliser Upgrade With Mini Siren

***Important Installer Note***
- Read Before Ordering!!! -

Note: Before attempting to install any alarm, check if the vehicle has CAN-BUS.
Some CAN-BUS vehicles will require a special CAN-BUS alarm, some will not.
Unfortunately you cannot determine what vehicles require a CAN-BUS alarm
just by the fact that the vehicle has CAN-BUS. Most new vehicles today have
CAN-BUS but some still do not have the ability to have a CAN-BUS alarm installed.
The only way for you to know is to access the vehicle database on the Dynamco
website. If you do not have a login to the installers section of the Dynamco website
then use the below website link and complete the registration form.

http://www.dynamco.com.au/support_register.php

If you determine from the Dynamco vehicle database that a vehicle requires a CAN-BUS
alarm, contact us with the Make / Model / Year information and we can organise an alarm
to be preprogrammed to suit the vehicle. It will take 2 to 3 working days to have the alarm
programmed and air freighted over. The part number for a CAN-BUS alarm is 03-695CAN.

Note: See below linked 03-051 for information on installing the mini battery backup siren

Read the below blue text for guidance on how to turn off the mini battery backup siren:
To change the vehicles battery turn the ignition ON before disconnecting battery.
This will disable the internal battery. Turn the ignition to OFF after replacing vehicles battery

The 03-P485B Cyclops factory alarm / immobiliser upgrade system with mini siren upgrades any keyless entry system into a full alarm system.

• Uses vehicles OEM remote controls.
• User retrievable diagnostics reports the last three triggers in reverse order.
• Automatic fault isolation should a zone become defective, the P455 will isolate & ignore the circuit responsible.
• 2 independent circuits of immobilisation the system uses robust 30 amp relays.
• Allowing immobilisation of the ignition, fuel or starter motor.
• Code hopping with random encryption with 1,800,000,000,000,000,000 codes.
• Battery backup siren.
• False alarm glass breakage detector.
• Bright flashing led shows the status of the P485 at all times.
• Visual response hazard lights flash to confirm arm/disarm.
• Security wiring if any wire to the system is cut, the engine is automatically immobilised.
• Disguised wiring all wiring is black and of same diameter.
• Security housing all plugs and sockets enclosed in housing.
• Emergency pin override quick high security override.
• Optional anti-hijack function locks doors 1 second after ignition turn on, unlock 1 second after ignition turn off.
• Interior dome light output.
• Guaranteed fully for 3 years.
• NZSA Certified & Manufactured in an ISO 9002 facility.