Spark Shop Ultimate
Part number: 34-161
Pack size: EA
Group: Receiver 
Type: 2 Way 
Feature: 12 Way Dipswitch, Interferance Free 
Amp: 10A At 12V/24V 

Part # 34-161

Reliable, universal, low cost, compact 915MHz 2 way wireless
receiver

Well suited for equipment and machinery control eg Crane Control, winches,
cement truck operation, lights etc

 
Note: Must be used with 2 way transmitter remote which is not supplied and
issoldseperately - see below links for related products

Note: 1 transmitter can operate multiple receivers

 
Objects obstructing the line of site between the transmitter and receiver
willreduce operating reception distance. It is advised to use 01-102 antenna to
helpprevent anypotential performace issues. See below links for related
products.

This transmitter remote uses fast frequency hopping (FFH) to allow up to eight transmitters to
be used in the same area. No interference or jamming will occur. The FFH technology is
usually used in very expensive equipment with military and medical applications. This
transmitter is unique providing a low cost, light weight hand held 915MHz FFH transmitter.

This transmitter uses a dual digital coding called Multicode Technology (MCT). This MCT
digitalcoding can be either the 12-way dipswitch or the encrypted coding. The 12-way dip
switchallows for simple programming and involves the user to simply match the 12-way dip
switchon both the transmitter and receiver. The Transmitters 12-way dip switch is found
under the rear cover where the 9V battery is located. The encrypted coding is a random
generatedcode whichis programmed wirelessly to the transmitter and receiver. The
encrypted code isusually usewhen more codes are required for high security applications.
See attached PDFsetupinstructions which are linked at the end of this page for moredetails
on the dipswitchand encrypted coding.

Features

  • Frequency hopping between 915 to 929MHz
  • Digital Coding, 12-way dipswitch or encrypted coding
  • Crystal Controlled for high stability and accuracy
  • Can operate several transmitters and receivers next to each with no interferences or
    jamming
  • On-board Red LED to indicate reception of a signal
  • Wide operating supply voltage and low current consumption.
  • Momentary and Latching modes are user selectable.
  • Plug-in type terminal block for easy wiring.

Typical Applications

  • Industrial and commercial automation systems.
  • Industrial monitoring.
  • Security and Automotive Systems.
  • Remote Keyless Entry for high Security Sites.
  • Equipment and machinery control, eg Crane Control, winches, cement truck operation,
    lights etc
  • Advanced home automation, eg Alarms, gates, doors, garden lights, swimming pool control etc

Output Modes

Relay output on the receiver can function in either momentary or latching mode. By default the
mode is set to momentary. Modes selectable from the 2-way dipswitch. Dipswitch 1
corresponds to relay channel 1 and dipswitch 2 corresponds to relay channel 2.

Factory Default = Momentary

Momentary - Output is active for as long as the transmitter button is pressed. This is a
standard mode on most automatic gates or garage door openers.

Latching - Output remains active until next press of the transmitter button. Similar to
switching "on" and "off" a light.

Related Products