Voltage Reducer DC - DC 1 Circuit 20A

Pacific Aerials Switchmode Reducer
20 Amp (24 Amp Peak)

Suits: HF/ SSB radio; high power audio and electronics

• Ideal for high vibration / high impact services
• Small size - easily installed - fits anywhere
• Supplied with cable connectors, clip-on mounting brackets and screws
• Manufactured in New Zealand
• EMC Testing: AS/NZS2064, EN50081-2
• Compliance marking: C-tick, CE mark
• Output and fault indicators: Green & Red LED's
• Input Voltage: 18 - 38V
• Output Voltage: 13.2V
• Peak load is available for a maximum of 5 minutes in each 20 minutes
• Typical Efficiency: >90%
• Temperature rating: -25C to +30C
• Over Temperature use: Above 30C ambient, reduce continuous load by 2% per degC
• Humidity: Maximum 95% non-condensing
• Case Material: T6063 marine grade aluminium, anodised
• Electrical Protection: Reverse input connection, output over current, output over voltage, transients
• Over Teperature Protection: Yes
• Enviromental Protection: IP533 dust, water and impact resistance
• Transient voltage protection: ISO7637-2
• Electrostatic voltage protection: ISO10605/14982. >8kV contact and 15kV discharge
• Output Noise: CISPR25,
• Colour: Blue

Sizes: (LxWxD) 160 x 75 x 32mm

When welding a vehicle where these reduces have been installed disconnect
the battery. Failure to do so will result in reducer damage.

WARRANTY VOID IF END COVER REMOVED!!!